|
Setting the Time on your Prostar System:
- With the
handset on-hook, dial "#20 1234 1 #". Display shows "MMC
Disable" prior to hitting the terminating "#" symbol.
- dial "#55".
Display shows [YY MM DD W HH MM].
- Dial new
information as follows:
- YY = Last
two digits of the year
- MM = Two
digit month (01-12)
- DD = Two
digit day of the month (01-31)
- W = Day of
the week (1-7, 1 for Monday and 7 for Sunday)
- HH = Two
digit hour (use military time)
- MM = Minutes
(00-59)
- Dial "#" to
complete the process and to set the new date and time.
- Dial "#20 1234 4 #"
to get the system to use a 12 hour clock rather than a 24 hour (Military) clock.
System Stops Ringing or Rings only on 1 Telephone
- If your system
stops ringing or only rings on 1 phone (usually extension 1 or 4), then you may
need to reprogram your system. Try the following:
- With the
handset on-hook, dial "#20 1234 1 #". Display shows "MMC
Disable" prior to hitting the terminating "#" symbol.
- dial "#62".
Display shows "Day Ring Assign"
- Press one Line
button from the group of incoming phone lines at the top of the phone keypad.
(ie., for your Line #1, press the first line button, for line #2 press the
second line button)
- Press all of
the Telephone Station/Extension buttons (left side of phone keypad) that you
want to ring for incoming calls. (ie., if you have extensions 1 2 3 4 and 6,
then press those buttons)
- Dial "#" to
complete the programming for the selected line.
- Repeat the
process for all lines on your system.
example: If
you have 3 phone extensions <ext1>, <ext2> and <ext4>, and if you have 2
incoming lines <line1> and <line2>, you would do the following:
-
#62<line1><ext1><ext2><ext4>#
-
#62<line2><ext1><ext2><ext4>#
FYI, when a
prostar system loses it's programming, it defaults to ringing on telephone
extension #4. If you have to extension #4, no phone will ring.
FYI, If you want
to display what your system is set to, dial #2012341# and then #62<line1>, the
display will show the telephone sets that will ring for line one (ie :124 from
example above). If the phone system has become unprogrammed, it will only
display :1 or 4
|
